Arti-Spot®is a contact color for testing the accurate fit of crowns, inlays, onlays, telescoping crowns and clasps and the friction surface of debris.
Arti-Spot®can be applied with a brush. The solvent evaporates in seconds, leaving a thin film 3µ thick. Every contact destroys the color skin exactly at the point of contact. The base material then shines clearly through and high spots can easily be detected.
Arti-Spot®can also be used to test high spots on highly polished occlusal surfaces such as gold or ceramic. The food dye contained in Arti-Spot®is completely safe.
Arti-Spot® can easily be removed after use. Hot water, mechanical friction (toothbrush or dental floss), alcohol, isopropyl alcohol and steaming will also loosen residual color deposits. On sealed dental plaster Arti-Spot®can also be removed with a brush.
Arti-Spray®is a universal color indicator to test the occlusal contacts and accurate fit of crowns and bridges.
Arti-Spray® is easy to handle and leaves a thin colored film which can easily be removed with water, leaving no trace of residues.
Apply at a distance of 3-5 cm onto the occlusal surface or inside the bridge or crown. When testing occlusion or trial seating the bridge or crown, all contact points will be immediately visible. Arti-Spray®can be used for approximal contacts when trial seating crowns and bridges.
Bio-Ink®-Flow is a green, highly viscous, easy to apply paste for marking sore spots on the gum and locating them on the denture.
Bio-Ink®-Flow is intended for marking points, areas and lines on the oral mucosa, such as sore spots, A-line, mucosal bands, folds and denture flanges. The relevant areas are colored with Bio-Ink®-Flow on the previously dried mucosa. When the dried denture is inserted, the color which has been applied to the sore spot is being transferred. Subsequently, the removable restoration can be adjusted.
Arti-Brux® is an occlusal indicator paint in red:
• to control static and dynamic occlusion on restorations, prosthetics and occlusal splints.
• short term occlusion control (max. 24 hours).
Arti-Brux® is a red indicator paint which is applied with a brush (single use product) to the occlusal surfaces to be tested. After drying, Arti-Brux® forms a saliva-resistant, thin and even coating.
To diagnose parafunctions (especially bruxism), Arti-Brux® has to be applied to the hard splint.
Due to the color abrasions, contact areas become clearly visible.